MAN V12-2000 Motor für MAN D2862 LE496
Hörsching7279 km von Ihnen
Wenn Sie sich entschließen ein Material zu einem niedrigen Preis zu kaufen, stellen Sie sicher, dass Sie auch mit dem tatsächlichen Verkäufer in Kontakt sind. Holen Sie sich möglichst umfangreiche Informationen über den Anbieter ein. Eine Betrugsmasche ist, dass sich der Anbieter als tatsächlich existierende Firma ausgibt. Wenn Sie Bedenken haben, informieren Sie uns über das Feedback-Formular, damit wir eine zusätzliche Kontrolle durchführen.
Bevor Sie sich entschließen einen Kauf zu tätigen, sehen Sie sich verschiedene Verkaufsangebote an, damit Sie den handelsüblichen Durchschnittspreis feststellen können für das Angebot, das Sie ausgewählt haben. Sofern der Preis des Angebots, das Sie sich ausgesucht haben, wesentlich niedriger ist, überprüfen Sie noch einmal Ihre Kaufabsicht. Eine große Preisdifferenz ist oft ein Hinweis auf versteckte Mängel oder einen Betrugsversuch des Verkäufers.
Kaufen Sie keine Produkte, bei denen der Durchschnittspreis bei vergleichbaren Angeboten zu stark abweicht.
Stimmen Sie keinen zweifelhaften Angeboten zu und auch keinen Vorauszahlungen. Sofern Sie Bedenken haben, zögern Sie nicht alle Details zu klären, nach weiteren Bildern zu fragen sowie nach Unterlagen für das Material, prüfen Sie die Echtheit der Dokumente und stellen Sie Fragen.
Dies ist die häufigste Betrugsmasche. Unlautere Verkäufer verlangen einen gewissen Betrag als Vorauszahlung, damit das Material für Sie "reserviert" wird und Sie anschließend den Kauf tätigen können. Dadurch können Betrüger große Beträge einkassieren und dann spurlos verschwinden.
- Bezahlung per Vorkasse mit Kreditkarte
- Leisten Sie keine Vorauszahlung ohne Dokumente, die die Überweisung bestätigen, sofern bei der Kommunikation mit dem Verkäufer bei Ihnen Bedenken aufgetreten sind.
- Überweisung auf ein "Treuhänder" Konto
- Eine solche Anfrage ist alarmierend und weist meist darauf hin, dass es sich um einen Betrüger handelt.
- Zahlung an ein Firmenkonto mit einem ähnlichen Firmennamen
- Seien Sie vorsichtig, Betrüger geben sich oft als bekannte Firmen aus und ändern nur geringfügig den Firmennamen. Überweisen Sie kein Geld, sofern Sie den geringsten Zweifel am Firmennamen haben.
- Änderung von eigenen Daten in der Rechnung einer tatsächlich existierenden Firma
- Bevor Sie eine Banküberweisung vornehmen, vergewissern Sie sich, dass alle Angaben korrekt sind und diese mit der betreffenden Firma übereinstimmen.
Kontaktdaten des Verkäufers
+358 50 53...
Anzeigen
+358 50 5345498
+358 9 231...
Anzeigen
+358 9 23165797
Österreich 
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Frankreich, Rouillac
Österreich, Hörsching
Finnland, Helsinki
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG