7I-8267 7I8267 Hydraulikmotor für Caterpillar 317 Midibagger







Wenn Sie sich entschließen ein Material zu einem niedrigen Preis zu kaufen, stellen Sie sicher, dass Sie auch mit dem tatsächlichen Verkäufer in Kontakt sind. Holen Sie sich möglichst umfangreiche Informationen über den Anbieter ein. Eine Betrugsmasche ist, dass sich der Anbieter als tatsächlich existierende Firma ausgibt. Wenn Sie Bedenken haben, informieren Sie uns über das Feedback-Formular, damit wir eine zusätzliche Kontrolle durchführen.
Bevor Sie sich entschließen einen Kauf zu tätigen, sehen Sie sich verschiedene Verkaufsangebote an, damit Sie den handelsüblichen Durchschnittspreis feststellen können für das Angebot, das Sie ausgewählt haben. Sofern der Preis des Angebots, das Sie sich ausgesucht haben, wesentlich niedriger ist, überprüfen Sie noch einmal Ihre Kaufabsicht. Eine große Preisdifferenz ist oft ein Hinweis auf versteckte Mängel oder einen Betrugsversuch des Verkäufers.
Kaufen Sie keine Produkte, bei denen der Durchschnittspreis bei vergleichbaren Angeboten zu stark abweicht.
Stimmen Sie keinen zweifelhaften Angeboten zu und auch keinen Vorauszahlungen. Sofern Sie Bedenken haben, zögern Sie nicht alle Details zu klären, nach weiteren Bildern zu fragen sowie nach Unterlagen für das Material, prüfen Sie die Echtheit der Dokumente und stellen Sie Fragen.
Dies ist die häufigste Betrugsmasche. Unlautere Verkäufer verlangen einen gewissen Betrag als Vorauszahlung, damit das Material für Sie "reserviert" wird und Sie anschließend den Kauf tätigen können. Dadurch können Betrüger große Beträge einkassieren und dann spurlos verschwinden.
- Bezahlung per Vorkasse mit Kreditkarte
- Leisten Sie keine Vorauszahlung ohne Dokumente, die die Überweisung bestätigen, sofern bei der Kommunikation mit dem Verkäufer bei Ihnen Bedenken aufgetreten sind.
- Überweisung auf ein "Treuhänder" Konto
- Eine solche Anfrage ist alarmierend und weist meist darauf hin, dass es sich um einen Betrüger handelt.
- Zahlung an ein Firmenkonto mit einem ähnlichen Firmennamen
- Seien Sie vorsichtig, Betrüger geben sich oft als bekannte Firmen aus und ändern nur geringfügig den Firmennamen. Überweisen Sie kein Geld, sofern Sie den geringsten Zweifel am Firmennamen haben.
- Änderung von eigenen Daten in der Rechnung einer tatsächlich existierenden Firma
- Bevor Sie eine Banküberweisung vornehmen, vergewissern Sie sich, dass alle Angaben korrekt sind und diese mit der betreffenden Firma übereinstimmen.
Kontaktdaten des Verkäufers
Product Overview
Ask most owners what worries them about a swing motor and they talk about speed. The more serious question is what happens after the lever returns to neutral. On a 317 working beside a trench, next to a wall, or with a labourer setting grade, the house must stay where it was stopped — and it must stay there while the machine is parked, while it is being loaded onto a truck, and while somebody is working below the bucket. A swing motor whose brake and internal sealing have worn lets the house creep, and creeping is the failure mode that turns an ordinary repair into an incident.
The symptoms rarely arrive as an obvious fault. The house drifts a few centimetres after the lever is released. It rotates slowly when parked on a slight gradient. On transport, tie‑downs must be checked twice because the house has shifted. Operators start leaving the bucket on the ground whenever they step off the machine — a workaround that tells you what they think of the brake. This assembly — references 7I‑8267 and 7I8267 — replaces the motor complete with renewed brake plates, pistons, bearings and seals, mounting to the original flange and port positions.
Core Advantages
1. The house stays put when the lever is released
A worn brake lets the house coast and creep. Renewed plates restore holding from the moment the lever returns to neutral.
2. Parking on a gradient stops being a routine risk
Machines left on a slope with weak brake holding move. Restored brake performance removes the practice of chocking and re‑positioning.
3. Transport loading becomes straightforward
A house that stays where it is set makes tie‑down predictable instead of a check‑and‑recheck routine.
4. Operators stop working around the machine
Leaving the bucket on the ground before stepping off is a symptom, not a habit worth keeping. Restored holding removes the reason for it.
5. Complete unit, tested for brake holding before dispatch
Holding performance is verified on the bench and logged, so the assembly is known to brake correctly rather than assumed to.
Manufacturing & Quality Control
Piston bores and bearing seats are machined to print tolerance, matched by size, and assembled with new seals and brake plates. Each unit is bench‑run to verify brake holding under load as well as rotation and torque, with results recorded against the reference. Motors ship drained, ports capped, shaft protected, and packed in foam‑lined crates.
Frequently Asked Questions
Q1: How do I confirm 7I‑8267 fits my 317?
A: Send a photo of the tag on the existing motor plus the machine serial number. Older machines carry several configurations and we verify before dispatch.
Q2: Is slight house movement after stopping normal?
A: A small settle is normal. Continued creeping, or movement while the machine is parked, indicates worn brake plates or internal leakage and should be addressed.
Q3: Can the brake be replaced on its own?
A: Sometimes, if the motor's rotating group is still sound. Where holding and swing performance are both weak, the complete unit is the more reliable repair.
Q4: What else signals a worn swing motor?
A: Slow acceleration, growling under load, rising oil temperature through the shift, and a house that does not stop where it was aimed.
Q5: What servicing accompanies installation?
A: Drain and flush the swing circuit, renew the return filter, verify brake adjustment and case drain after fitting, and refill with specified oil.
Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from contaminated oil, a blocked case drain line, or a unit run with the brake incorrectly adjusted is not. Photograph the packaging before opening if it arrives damaged.