14511439 Hydraulikverteiler für Volvo EC290BLC Midibagger
Wenn Sie sich entschließen ein Material zu einem niedrigen Preis zu kaufen, stellen Sie sicher, dass Sie auch mit dem tatsächlichen Verkäufer in Kontakt sind. Holen Sie sich möglichst umfangreiche Informationen über den Anbieter ein. Eine Betrugsmasche ist, dass sich der Anbieter als tatsächlich existierende Firma ausgibt. Wenn Sie Bedenken haben, informieren Sie uns über das Feedback-Formular, damit wir eine zusätzliche Kontrolle durchführen.
Bevor Sie sich entschließen einen Kauf zu tätigen, sehen Sie sich verschiedene Verkaufsangebote an, damit Sie den handelsüblichen Durchschnittspreis feststellen können für das Angebot, das Sie ausgewählt haben. Sofern der Preis des Angebots, das Sie sich ausgesucht haben, wesentlich niedriger ist, überprüfen Sie noch einmal Ihre Kaufabsicht. Eine große Preisdifferenz ist oft ein Hinweis auf versteckte Mängel oder einen Betrugsversuch des Verkäufers.
Kaufen Sie keine Produkte, bei denen der Durchschnittspreis bei vergleichbaren Angeboten zu stark abweicht.
Stimmen Sie keinen zweifelhaften Angeboten zu und auch keinen Vorauszahlungen. Sofern Sie Bedenken haben, zögern Sie nicht alle Details zu klären, nach weiteren Bildern zu fragen sowie nach Unterlagen für das Material, prüfen Sie die Echtheit der Dokumente und stellen Sie Fragen.
Dies ist die häufigste Betrugsmasche. Unlautere Verkäufer verlangen einen gewissen Betrag als Vorauszahlung, damit das Material für Sie "reserviert" wird und Sie anschließend den Kauf tätigen können. Dadurch können Betrüger große Beträge einkassieren und dann spurlos verschwinden.
- Bezahlung per Vorkasse mit Kreditkarte
- Leisten Sie keine Vorauszahlung ohne Dokumente, die die Überweisung bestätigen, sofern bei der Kommunikation mit dem Verkäufer bei Ihnen Bedenken aufgetreten sind.
- Überweisung auf ein "Treuhänder" Konto
- Eine solche Anfrage ist alarmierend und weist meist darauf hin, dass es sich um einen Betrüger handelt.
- Zahlung an ein Firmenkonto mit einem ähnlichen Firmennamen
- Seien Sie vorsichtig, Betrüger geben sich oft als bekannte Firmen aus und ändern nur geringfügig den Firmennamen. Überweisen Sie kein Geld, sofern Sie den geringsten Zweifel am Firmennamen haben.
- Änderung von eigenen Daten in der Rechnung einer tatsächlich existierenden Firma
- Bevor Sie eine Banküberweisung vornehmen, vergewissern Sie sich, dass alle Angaben korrekt sind und diese mit der betreffenden Firma übereinstimmen.
Kontaktdaten des Verkäufers



Product Overview
Volvo part numbers appear in catalogues in two forms: with the VOE prefix and without it. The digits are the same, but systems search them differently, and a block ordered against the wrong string can end up being a different assembly entirely. The EC290BLC — the long‑undercarriage 29‑ton Volvo — carries reference 14511439 on this listing, and the block is configured for boom, arm, bucket, swing and travel flow division.
The LC build is bought for stability: longer tracks, better footing on soft ground, more reach without repositioning. Those advantages depend on hydraulics holding steady, and a worn block takes them away quietly. The boom sags on a held bucket while levelling. The arm skips at stroke start. Swing lands short. The machine bogs when the bucket is worked. All of it comes from oil crossing between circuits past worn spools. This aftermarket distribution valve replaces the assembly complete with fresh internals, so the tired unit comes off in one piece and the replacement fits the original hose positions.
Core Advantages
1. Reference matched with and without the prefix
We verify 14511439 against your tag regardless of how it is written in your system, so the order is not lost to a formatting difference.
2. Stability work gets its accuracy back
Levelling and grading on soft ground depends on a boom that holds where it is placed. Restored retention delivers that.
3. Reach without repositioning stays usable
LC machines are bought to work further from the edge. When hydraulics hold steady, the operator stops shuffling the machine to compensate.
4. Swing lands on the mark first time
Restored circuit isolation ends the overshoot‑and‑correct habit that costs seconds on every placement.
5. Complete assembly rather than piecemeal repair
One tested block resolves every drifted circuit instead of returning to the machine for one failure after another.
Manufacturing & Quality Control
Spool and bore pairs are machined to print, matched by size, and hand‑run‑in until full‑stroke movement is free of binding. Assembled blocks are flow‑tested circuit by circuit with relief and compensator values logged against EC290BLC figures; out‑of‑window units are stripped and corrected. Blocks ship internally oil‑fogged, ports capped, and crated on foam.
Frequently Asked Questions
Q1: Is 14511439 the same as the block with a VOE prefix?
A: Prefixes are catalogue conventions, not different parts, but the digits must match exactly. Send your tag and we confirm which reference your machine carries.
Q2: Does this fit the standard EC290B as well as the LC?
A: The LC and standard builds share much of the platform but can differ in trim and porting. The serial number determines the configuration, and we supply the matching block.
Q3: What symptoms indicate the valve rather than the pump?
A: Drift on held loads, slack at stroke start, inconsistent swing and load‑dependent tracking point to the block. Uniform slowness with hot oil points to the pump. A leak test settles it.
Q4: Can my existing block be rebuilt?
A: If the casting is sound and has never been rebuilt, a kit may restore it. Where several circuits leak, a complete assembly usually gives better value. Photos help us judge.
Q5: What hydraulic servicing accompanies installation?
A: Flush the system, renew the return filter, clean the suction strainer, and refill with specified oil. Contaminated oil will damage new clearances quickly.
Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from dirty oil, water ingress, a spool forced against a bind, or reliefs altered outside specification is not. Photograph the crate before opening if damage is visible.